high speed steel tile forming machine
Basic Info
Model No.: ZT-004-097
Product Description
high speed steel tile forming machine
high speed steel tile forming machine is also steel tile forming machine or colored roof panel roll forming machine . Roof sheets or panels made by high speed steel tile forming machine are widely used in construction and transportation industries and so on. As to the construction industry,it is mainlyused in steelplants, airports, warehouses andrefrigerationand other industrial andcommercial building asroofs,wallsand doors. Civil house lessly use color plate.
Checking machine from the whole
Checking machine from the very beginning.
Checking machine from the left
Bird view of the machine
Now let us check details of each parts:
Just now we measured the frame thickness for you.
We measured the tile box for you.
This is the counter. And the main machine motor.
Main Paremeter of high speed steel tile roll forming machine
No. | Name | Unit | Qty |
1 | Manual decoiler | Set | 1 |
2 | Leveling beach by manual adjustment | set | 1 |
3 | Main forming machine | set | 1 |
4 | Shearing system with one Cylinder | set | 1 |
4 | PLC control system | set | 1 |
5 | Hydraulic pump station | set | 1 |
6 | Motor drive | set | 1 |
7 | Output table | set | 1 |
5.5kw-0.8mm MACHINE | |||
1 | Machine working speed | 8 to 20 m/min | |
2 | Frame middle plate with connect bar | 30 pieces | |
3 | 350H Steel welded frame | One set | |
4 | Frame thickness | 16 mm | |
5 | Drive mode | Chain 1.0 | |
6 | Chain gear | 195 diameter | |
7 | Material of rollers 45#steel surface hard chromium plating | ||
8 | Material of shaft | 45#steel | |
9 | Diameter of shaft | 80 mm | |
10 | Roller satiation | 15 station | |
11 | Main power | 5.5 kw | |
12 | Motor brand | China mengniu | |
13 | PLC brand | Delta | |
14 | Hydraulic power | 3 kw | |
15 | Two leveling rollers to make sure coil neat and clear | ||
16 | Give machine legs 2 pieces 1000mm*250mm | ||
17 | One holder two spring | ||
18 | Steel color of the protection bar, or you can specify | ||
19 | Supported material thickness from 0.2 to 0.8 mm | ||
20 | Working speed, adjustable. | ||
21 | yellow cutter and blue body or you can specify the color |
Maintenance methods and working principle of roll forming machine:
Circuit: Notice board cleaning, regularly clean up the dust of the electrical boxes, keep electrical boxes dry avoiding
moisture.
Oilway: Check whether there are oil leakages for every parts, timely handle. Prevent scratching on the piston rod and oil deterioration.
Equipment: check if there are abrasions on the transmission parts.
Check whether the grease fitting were blocked, and infuse butter.
Packaging
1. one 40ft container for loading one set machine with manual decoiler;
2. the whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3. Spare parts and some small parts packed in plastic tooling box;
4. All Components Fixed by steel wire with Container.
Spare parts ( for free) 1. Easy damaged parts: conk 2 pcs, fuse-link 4 pcs; 2. Rubber mat 1 pcs; 3. Bolt spanner 1 pcs 1. Installation and training: 2. After Service a.One year guarantee for whole machine. b.24 hours technical support by email or calling c.If there is any problem found of the machine, we will repair it for free in one year. Contact information:
| | |
| | |
Product Categories : Roofing Sheet Roll Forming Machine > Roof and Wall Panel Roll Forming Machine